How to Oil Uni 2 Stage Filter
When it comes to maintaining your air filter, one of the most crucial tasks is to ensure it’s properly oiled. This is especially true for the Uni 2 Stage Filter, which is designed to provide superior air filtration for your engine. In this guide, we’ll walk you through the process of oiling your Uni 2 Stage Filter, step by step.
Understanding the Uni 2 Stage Filter
The Uni 2 Stage Filter is a two-part air filter system that consists of a foam pre-filter and a paper element. The foam pre-filter captures larger particles, while the paper element traps finer particles. This dual-stage design ensures that your engine receives clean air, which is essential for optimal performance and longevity.
Over time, the foam pre-filter can become clogged with dirt and debris, reducing its effectiveness. Oiling the foam pre-filter helps to maintain its shape and efficiency, ensuring that your engine continues to breathe clean air.
Gathering the Necessary Materials
Before you begin, gather the following materials:
- Uni 2 Stage Filter
- Filter Oil (Suggested: Mobil 1 Air Filter Oil)
- Funnel
- Microfiber Cloth
- Old rag or paper towel
Step-by-Step Guide to Oiling Your Uni 2 Stage Filter
1. Remove the Foam Pre-Filter
Start by removing the foam pre-filter from the Uni 2 Stage Filter. This is usually done by unscrewing or unclipping the pre-filter from the housing.
2. Clean the Foam Pre-Filter
Using a microfiber cloth, gently wipe down the foam pre-filter to remove any loose dirt or debris. Be sure to clean both sides of the filter.
3. Apply Filter Oil
Using the funnel, pour a small amount of filter oil onto the foam pre-filter. The amount of oil needed will vary depending on the size of the filter, but a general guideline is to apply about 10-15ml of oil. Ensure that the oil is evenly distributed across the entire surface of the foam pre-filter.
4. Wipe Off Excess Oil
After applying the oil, use a clean microfiber cloth to wipe off any excess oil that may have dripped onto the paper element or housing. This will prevent oil from entering the engine and causing damage.
5. Reinstall the Foam Pre-Filter
Once the foam pre-filter is oiled and excess oil has been wiped off, reinstall it into the Uni 2 Stage Filter housing. Make sure it is securely fastened.
6. Reinstall the Entire Filter
Finally, reinstall the entire Uni 2 Stage Filter into your engine. Ensure that it is properly seated and secure.
Precautions and Tips
Do not over-oil the foam pre-filter. Too much oil can cause the filter to become clogged, reducing its effectiveness. If you notice that the filter is becoming saturated with oil, it’s time to replace it.
Always use the correct type of filter oil. Using the wrong type of oil can damage the foam pre-filter and reduce its lifespan.
Regular maintenance is key. Oiling your Uni 2 Stage Filter should be done as part of your regular engine maintenance schedule. This will help ensure that your engine continues to receive clean air and performs at its best.
By following these steps and tips, you can keep your Uni 2 Stage Filter in top condition, ensuring that your engine stays healthy and performs optimally.